Kiour ALU-AP Alarm Unit

350,00

DIGITAL ALARM UNIT WITH 10 DIGITAL INPUTS

Download Manual                PDF  

Suitable for use in ship’s bridge, console and engine room

• Product Design Assessment certificate from the American Bureau of Shipping
• Suitable for use in ship’s bridge, console and engine room
• Operates in master or slave or repeater mode
• 10 digital alarm inputs 24VAC/DC
• Cut line monitoring
• NO or NC contact activation
• Time delay in each input
• 14 digital outputs for driving relays
• Capability of holding the alarm after the RESET
• Internal relay 250VAC 10A for setting up an external alarm circuit in case of main power failure
• One general internal relay 250VAC 10A
• Set up of RS485 network by units (up to 98) or by computer
• Connection to thermal printer for instant printing of an alarm
• Dimensions 144x144x44mm
• Device is mounted on a panel hole with dimensions 138x138mm
• Connection with pluggable terminal blocks
• Power supply 24VAC ± 10% 50/60Hz or 24VDC +30% /-10% 50/60Hz
• Maximum consumption 10W
• Operating temperature -15÷70˚C
• Internal fuses to main power supply, outputs and network
• Class of equipment: Class II
• Front side protection rating ΙΡ42

Category:

Description

 

Digital Alarm Unit with 10 input Channel

• Product Design Assessment certificate from the American Bureau of Shipping
• Suitable for use in ship’s bridge, console and engine room
• Operates in master or slave or repeater mode
• 10 digital alarm inputs 24VAC/DC
• Cut line monitoring
• NO or NC contact activation
• Time delay in each input
• 14 digital outputs for driving relays
• Capability of holding the alarm after the RESET
• Internal relay 250VAC 10A for setting up an external alarm circuit in case of main power failure
• One general internal relay 250VAC 10A
• Set up of RS485 network by units (up to 98) or by computer
• Connection to thermal printer for instant printing of an alarm
• Dimensions 144x144x44mm
• Device is mounted on a panel hole with dimensions 138x138mm
• Connection with pluggable terminal blocks
• Power supply 24VAC ± 10% 50/60Hz or 24VDC +30% /-10% 50/60Hz
• Maximum consumption 10W
• Operating temperature -15÷70˚C
• Internal fuses to main power supply, outputs and network
• Class of equipment: Class II
• Front side protection rating ΙΡ42